|
BALATRON B221 G2 |
||||||
|
||||||
|
||||||
Technical data |
|
| Power source | 220V 50-60Hz 1Ph |
| Motor power | 50W |
| Absorbed power | 60 Watt |
| Balancing speed | 98 RPM |
| Rim Diameter | 8" (200 mm) - 26" (650 mm) |
| Rim Diameter (alu-s) | 8" - 23" |
| Wheel Diameter (max) with wheel guard without wheelguard |
34" (850 mm) 49" (1250 mm) |
| Wheel width (max) with wheel guard |
16" (415 mm) |
| Wheel weight (max) | 75 Kg (166 Lbs) |
| Measuring time | 4 - 15 s. |
| Precision | 1 gr. (0.05 oz) |
| Functions | ||||
B212.G2 |
B221.G2 |
B306.G2 |
B331.G2 |
|
Hardware Features
|
||||
| Weight compartments | 6 |
6+1 |
7+1 |
9 |
| Cone compartments | Yes |
Yes |
no |
yes |
| Flange supports | 4 |
4 |
6 |
4 |
| Wheel data input - IN Automatic input of distance and diameter |
opt |
opt |
opt |
opt |
| Wheel data input - OUT Automatic input of width |
no |
no |
opt |
opt |
| Foot lock pedal to ease locking-unlocking of flanges and application of weights |
yes |
yes |
yes |
yes |
Software functions (standard = Level 1)
|
||||
| Unit of measure mm / inches (user setup) |
Yes |
Yes |
Yes |
Yes |
| START-STOP Automatic |
Yes |
Yes |
Yes |
Yes |
| Display step 1 / 5 gr (user setup) |
Yes |
Yes |
Yes |
Yes |
| Display cut-off 1..9 gr (user setup) |
Yes |
Yes |
Yes |
Yes |
| Stop-on-top at the end of measuring run, wheel is stopped with point of application of weight placed at 12 o'clock |
Yes |
Yes |
Yes |
Yes |
| Autodiagnostic a great number of malfunctions or user mistakes in procedure are detected |
Yes |
Yes |
Yes |
Yes |
| Autocalibration sensor calibration can be easily performed by the user |
Yes |
Yes |
Yes |
Yes |
| SPLIT to divide the balance weight and place them in a the desired position (usually hidden behind the spokes, non-visible) |
Yes |
Yes |
Yes |
Yes |
| Statistics total number of spins, the % of success, the % for each diameter |
Yes |
Yes |
Yes |
Yes |
| FCC Fast Calibration Check | Yes |
Yes |
Yes |
Yes |
| ALU-S allows to measure and enter the exact position of adhesive weights to be placed on alloy rims |
Yes |
Yes |
Yes |
Yes |
| ALU-SE ALU-S Electronic allows to enter measurements automatically and find automatically the exact position of adhesive weights to be placed on alloy rims |
opt |
opt |
opt |
opt |
| MARS Automatic Minimization of Residual Static Unbalance allows to reduce the static unbalance left, due to rounding when using weights multiple of 5 grams. |
Yes |
Yes |
Yes |
Yes |
Software functions (Level 2)
|
||||
| Optimization Tyre Matching (LEVEL2) Static (tyre rotation) |
opt |
Yes |
Yes |
Yes |
| AFC Automatic Flange Calibration (LEVEL2) allows to use even non-balanced flanges (dirty, worn, etc.) |
opt |
Yes |
Yes |
Yes |
| DUAL-OP Double Operator (LEVEL2) Two users can share the unit at the same time independently |
opt |
Yes |
Yes |
Yes |
Software functions (Level 3)
|
||||
| ASF ALU Special Functions (LEVEL3) Allows to place adhesive weights at 6 o'clock and other useful functions. |
opt |
opt |
opt |
opt |
| APS Automatic Positioning System (LEVEL3) Allows to move wheel automatically to inside/outside position for application of the balancing weight. |
opt |
opt |
opt |
opt |
| FAST Fast balancing mode (LEVEL3) Allows to measure wheel unbalance in half time (for when you have peak-hours time/periods). |
opt |
opt |
opt |
opt |
| AUTOSELECT (LEVEL3) Automatic selection of balancing mode (dynamic, alu-s1, alu-s2) by simply entering the wheel dimensions |
opt |
opt |
opt |
opt |
| LEVEL2 = this option is included with Activation of LEVEL2 LEVEL3 = this option is included with Activation of LEVEL3 |
||||
| Optional functions and accessories | |
| Wheelguard | wheel cover is optional as balancer runs at low speed |
| ALU-SE | Allows to measure and enter the exact position of adhesive weight automatically |
| Dimensions | |||
 |
|||
Packing (mm) |
|||
A |
B |
C |
|
| B221.G2 | 940 |
570 |
1120 |
Weight (kg) |
|||
Gross |
Nett |
||
| B221.G2 | 74 |
62 |
|
Dimensions (mm) |
|||
L |
W |
H |
|
| B221.G2 | 1110 |
570 |
990 |
| BALATRON Series - digital wheel balancers - compact | ||||
 |
 |
 |
 |
 |
| BALATRON Series - digital wheel balancers - Heavy Duty | |||
 |
 |
 |
 |
| VIDEOTRONIC Series - video wheel balancers - Heavy Duty | ||||
 |
 |
 |
 |
 |
Need
some advice? Contact: [info@agequipment.co.uk] |
